1993 Chevrolet S-10 "replace rear main seal chevy" Questions

How do you replace rear main oil seal on '93 Chevy S-10 pickup? Remove trans, remove flywheel, remove and replace seal.

...replace the seal you will need to remove the transmission to gain access to the rear main seal APPLY LIGHT COAT OF ENGINE OIL ON SEAL LIP AND OUTER EDGE OF NEW SEAL.PRESS NEW SAEL IN PLACE WITH TOOL ...

do I have to drain the oil to replace rear main seal in a 93 chevy s10 w/ 2.8l v6? You have to pull the engine loose because it's in between the transmission & engine.

...replace the seal/gasket, or do i have to pay extra to get it fixed and how much does it cost. The Borg Warner T-5 manual transmission has no filter. Assuming the leak is not really the rear main seal ...

replace a rear main seal in a 2001 chevy 2500 do i have to remove oil pan and loosen crank bolts to replace the rear main seal? is it easyer to pull the eng. and replace seal? how long is the standard

...replace the rear seal , the transmission will need to be removed. If its the front, then the harmonic balancer will be removed. $380 sounds cheap. As you will need a oil seal, oil pan gasket, oil, ...

...rear main seal(yeah,it's a pain).Gone are the days of using one of those "rope style" replacement seals(like on a small block Chevy) that you can slip in by just removing the pan(aint progress ...

...To replace the rear main seal the engine and tranny must be separated. In my opinion, I would pull the engine to do everything you want to do, while its out you can easily clean out the engine ...

replace the rear main seal on my 95 chevy pickup with a 350. do i need to drop the tranny? Yes, either pull the trans or pull the engine. No way to get in there with out having one of the two out! FYI

how do i replace my rear main oil seal in my 1984 k5 chevy blazer down transmission -take flywheel or flex-plate off -if it has 305cubic inch it has one piece rear seal