1993 Chevrolet S-10 "replace rear oil seal chevy" Questions

How do you replace rear main oil seal on '93 Chevy S-10 pickup? Remove trans, remove flywheel, remove and replace seal.

...replace the seal you will need to remove the transmission to gain access to the rear main seal APPLY LIGHT COAT OF ENGINE OIL ON SEAL LIP AND OUTER EDGE OF NEW SEAL.PRESS NEW SAEL IN PLACE WITH TOOL ...

do I have to drain the oil to replace rear main seal in a 93 chevy s10 w/ 2.8l v6? You have to pull the engine loose because it's in between the transmission & engine.

...rear of the engine underneath. The oil drips out of this stainless steel plug You sure the oil comes from the plug and doesnt just run down from above and drip of it? Clean aroun the area and take a ...

...oil contamination on pad contact surface. Hello Yooperboogs!Not to say these two solutions by Williams or by thruster are just simply wrong, however, this insight might save you from "Thinking" it is ...

...replace the rear seal , the transmission will need to be removed. If its the front, then the harmonic balancer will be removed. $380 sounds cheap. As you will need a oil seal, oil pan gasket, oil, ...

...removed oil pan replaced filter&gasket replaced rear ext housing seal only leaks when driveing ou may need to remove the front pump and replace the seal on the pump and the converter seal as ...

...end onto the brake shoes. you will have to pull the rear axle to replace the seal and clean the rear brakes/area with brake cleaner or replace the rear brakes if they are too soaked with brake

replace a rear main seal in a 2001 chevy 2500 do i have to remove oil pan and loosen crank bolts to replace the rear main seal? is it easyer to pull the eng. and replace seal? how long is the standard

...replace rear oil seal on 1994 chevy 350 cubic in google it, there are several answers out there. apparently after mid 87 the seal is 1 piece and you must remove the transmission to replace it. Try to ...