...distributor cap..If you do..Replace them.. Remove distributor cap and check contacts on cap and rotor.. Partially remove coil wire and have someone crank engine and look for spark at wire end. Pretty ...
Question about Pontiac Bonneville
...soon light came on, yes ? egr valve can cause this, spark plug wires might cause this, check distributor cap/rotor, old spark plug wires can cross fire because of shorting out. see how that ...
...Distributor cap and rotor (If used) (Not on yours), Bad Coil pack (if used) (Yours has coil packs). Some engines have no distributor cap and rotor and some also have no Ignition wires ( a coil pack ...
Question about Pontiac Bonneville
...distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat ...
...distributor cap, rotor. Check your timing belt as well. You only have to remove a bolt or two to see it. Make sure it is not broke or missing teeth. I know this is a lot of things to do, but when a ...
...distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat ...
...distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat ...
Question about Pontiac Bonneville
...distributor cap is to be replaced, mark the ignition wires for identification and remove them from the distributor cap.Remove any components necessary to access the distributor cap.Completely loosen ...
distributor cap,do u think that the rotor cap is bad Your distributor bushing is bad, causing the distributor to wobble when running. Get it checked out for repair and/or replace the distributor. Take
...DISTRIBUTOR CAP BEFORE REMOVING CAP. SO YOU CAN PUT PLUGS WIRES BACK IN THE ORIGINAL POSITION. WHEN ALL PLUGS WIRES ON DISTRIBUTOR CAP BEEN NUMBER.REMOVE ALL PLUG WIRES ON CAP.THEN REMOVE THE ...
708 questions posted
Usually answered in minutes!
547 Questions
481 Questions
432 Questions
391 Questions
329 Questions