2005 Chevrolet Blazer "bumper jack" Questions

...have a nice day. Go under the truck and remove the four to six bolts that hold it to the frame and into the wiring harness then careful lower the bumper down with a hydraulic

...closely between the bumper and tail gate, you should see a square socket looking hole. You take the handle off your jack, insert it into that hole and twist the jack handle to lower your spare

I NEED TO TAKE THE SPARE TIRE OFF. HOW DO I UNLOCK? stick the long jack rod into the port above the rear bumper.

...from underneath vehicle there is a hole in the rear bumper, you put the rod from your jack handle into and turn to let it down. Sometimes they get stuck and you have to pull on the tire when

bumper. Be sure the chisel end of the wheel wrench connects into the hoist shaft. Turn the wheel wrench counterclockwise to lower the spare tire. Keep turning the wheel wrench until the spare tire can

...jack up one side of the car 1) Remove 4 screws on top of bumper ( under hood, above kidney grills) 2) Remove 2 screws in each wheel-well, and clip bumper trim away from wheel-well trim 3)Push ...

...bumper cover. Optional Step: Using a Floor Jack, raise both sides of the car in the back, supporting both sides with jack stands, and remove the rear wheels. Using Torx Bits, remove the inner rear ...

...BUMPER YOU SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS.WORKING UNDERNEATH VECHICLE YOU DISCONNECT FOG LIGHT ELECTRICAL CONNECTIONS IF EQUIPPED. WORKING FROM BACK OF THE BUMPER REMOVE ALL BOLTS THATS ...

...bumper cover. Optional Step: Using a Floor Jack, raise both sides of the car in the back, supporting both sides with jack stands, and remove the rear wheels. Using Torx Bits, remove the inner rear ...

...jack stands. Disconnect fasteners retaining the splash apron under the radiator. These form part of the wheelwells on each side. Remove the fascia where it is attached to the fenders. Each side will ...