1991 Chevrolet Corvette "junction box instalation" Questions

Ad

Question about Chevrolet Corvette

1 Answer

...BOX? I TRACED WIRE FROM A JUNCTION BLOCK ON DRIVER SIDE FROM THE REGULATOR WIRE ON THE ALTERNATOR DIRECTLY INTO THE FUSE BLOCK AND IT IS NOT TOUCHING ANYTHING UP TO THE FUSE BLOCK BUT YET IS STILL ...

Ad

...junction box located inside the passager compartment . Under the dash panel left side . You can take the relay back to autozone because it's not the right one ! The relay is inside the smart junction ...

Ad

Question about Chevrolet Corvette

2 Answers

...junction box (CJB). The central junction box is located behind the passenger lower kick panel. ------------------------------------------------------------ Symptom Chart Symptom Chart Condition ...

Question about Chevrolet Corvette

1 Answer

...junction box (SJB) Instrument cluster Restraint control module (RCM) Inspection and Verification Verify the customer concern. Visually inspect the following for obvious signs of mechanical or ...

Question about Chevrolet Corvette

1 Answer

...junction box Crank the engine. Allow the engine to start and stall. Crank the engine for an additional 3 seconds to ensure the relief of any remaining fuel pressure. Disconnect the negative battery ...

...junction box an it is a non- serviceable part . soldered to the board inside . Where do you hear the clicking noise coming from ? The SJB is located behind the left side kick panel . SECTION 413-06: ...

...junction box(interior fuse panel) If your vehicle was originally equipped with this feature then you may just need to have it reprogrammed or turned on by the dealer with their scan tool. If it was ...

Question about Chevrolet Corvette

1 Answer

...junction box has everything working and all fuses are good, the right junction box is where the problem has been traced to so far, all the fuses are good, but they do not have power, I grabbed a ...

Question about Chevrolet Corvette

1 Answer

...junction box is ? This fords BCM - body control module .( computer ) The smart junction box (SJB) monitors the headlamp switch position by sending multiple voltage reference signals to the headlamp ...

Question about Chevrolet Corvette

1 Answer

...junction box/ battery that needs removed. Do this by removing that little bolt. Now set the relay junction box over to the side. Now remove the mounting bolt for the battery from the back/bottom side ...

Not finding what you are looking for?
1991 Chevrolet Corvette Logo

230 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...