...S10 P/U 2WD) 4 Cylinders E 2.5L TBI (found in 53% of 1991 Chevrolet S10 P/U 2WD) 6 Cylinders R 2.8L TBI (found in 47% of 1991 Chevrolet S10 P/U 2WD) 6 Cylinders Z 4.3L TBI (found in 53% of 1991 ...
...s10 4.3l TBI that will not start. I have a chevy s10 4.3l TBI that will not start. If I pour gas in the carb it will start and continue to run. the fuel pump, fuel filter, and fuel relay has been ...
S10 2.5L TBI- no fuel spray, did I test this correctly? 91 S10 2.5L TBI There is 12V between the two injector wires, but no fuel spray- did I test this correctly? I've replaced the pressure regulator,
...tbi I have an 87 s10 blazer with 2.8L I Replace tbi injector plate and 0 rings and now injectors don't have any power to them. Injectors tested out okay and there is fuel getting to them. Can put gas ...
S10 Pickup 4.3. VIN Z transplant? Can someone please give me direction in regards to swapping out my TBI 4.3 engine with a 5 speed 4x4 truck to a 3rd generation fuel injected 4.3. Will also be using a
...S10 2.5L tbi replaced fule pump,tbi,fule screen,distributor, and fule pump. It will crank over but no start. what can be the problem and how do I solve it ? out of time. get piston num. 1 to top dead ...
flooding on start up i have an 88 chevy s10 with the 2.8 v6 tbi, why does it spray to much gas on start up and cause the engine to flood try the cooling sensor
...run from the transfer case on 1988 blazer s10 4.3 for 4 wheel drive Click over image for zoom... Fig. 48: 1989 4.3L TBI engine - federal altitude Fig. 49: 1991 4.3L engine - federal and high ...
.../ 95 chevy s10 / 2wd / 4.3 v6 tbi There is no wiring to do Where did you get that from? You buy the correct O2 Sensor & install it It should look exactly like the one you remove, just plug it ...
I need the engine/ecm schematic for a 93 s10 4.3 tbi auto. Thanks. Have to buy that from Helm.Com or get part of it from a repair shop data base
694 questions posted
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
747 Questions
686 Questions