1996 Chevrolet Tahoe "engine problems vortec" Questions

...Vortec Engine 4.3 liter 4WD. Engine will turn over once or twice then quit. Sometimes hear whining noise when trying to start. Best guess is the starter. Battery is new and I also tried jumping. you ...

something else that can cause this is if the injectors are dirty/plugged. if this is a Vortec engine they have problems with the spider injection system leaking inside the intake requiring replacement

...Vortec v8 350 engine on an 05 Tahoe its bogging down like its not getting any gas what do I do Could be many different things. One simple thing to try is to put a couple of bottles of fuel injector ...

Vortec. Truck will not start, the starter grinds VERY loudly. Replaced starter several times, battery is good, replaced crank position sensor. Possible pre ignition? The past few times I have replaced

...engine was recently removed and replaced if that helps and it is on a 1998 chev tahoe with the 350 vortec you will have to remove upper intake plenum the black plastic part there is a o-ring around ...

problems: 1. Check the fuel pump ground strap next to the gas tank as it could be broken from the connector or just loose. 2. Have a fuel pressure test done on the fuel lines at the engine top. (Note:

...engine winding or revving but its like I ran into a wall. Also, I drove a friend of my mines 96 with a vortec and it will haul compared to mine, did really notice a difference in exhaust tone also ...

...Vortec - 96 Express, Stalled while driving - started right up - passed off as a fluke. Next day, under a towing load, check engine light (haven't had time to get code yet), then another stall - ...

...vortec flex fuel. Engine replaced at 60k miles due to low end knock (typical late model GM). Scanner shows mutiple misfires on all 8 cylinders and erratic timing. Rough idle. Everything replaced, ...

...Vortec engine yours is likely the V8 engine .But Chevy has a problem with the cooling systems in all of there engines and have had it for years. The intake manifolds are not bolted down well enough 8 ...