1998 Chevrolet C1500 "tell ac enough freon" Questions

...tell you if you have enough freon in your system. When you charge it make sure the ac is on full max before charging Yea I used low side it is retrofitted to r134a wanna put that in there the pump ...

...freon quickley or it will shut down again,,once u start adding freon it (the ac compressor)will cycle on and off until u get enough freon in it ,but gauges will tell more about that,,DON`T OVER ...

ac compressor should cycle on and off,this is normal,until there is enough freon in system.When the can starts to empty,shake the can lightly until empty.It will be hard to tell,but you will figure it

...line will turn the compressor off to keep it from burning up.Ac gauges is the only way to tell what is going on with your ac.There are a lot of things that will cause the compressor not to come

...on to get it to take the freon. Fix the ac freon leak and put freon back in. When you get enough pressure in the system the compressor will come on. Go to another garage and see what they tell

...AC with out proper gauges ,once gauges are on it will tell if there is freon in the lines or not ,most likely there is a leak somewhere,if there is enough freon inthe lines and the comp still won't ...

enough so it's staying on which can burn out the bearings if not taken care of ASAP. Did you set the shims right in the ac compressor clutch if not it will run all the time even with the switch turned

...you don't have enough refrigerant in the system. i would suggest getting an ac pressure tester they are fairly inexpensive but this will tell you for certain if you have enough refrigerant or

...ac gauges on the vehicle you could tell a lot about the system,It would tell if the low side was too low(bad expansion valve)or if it was too high on the low side or high side (bas expansion valve or ...

...tell,there is a problem there somewhere or the ac system would not shut down,the system while not running,it is hard to tell if there is enough freon ,or not,but check it with the gauges to tell for ...