remove the nut holding the yoke to the pinion gear (rear end) ,pop out the old seal and drive in the new seal, then reinstall the yoke and torque down the nut and reinstall the drive shaft. fluid loss
...pull the brakes off open the rear diff there will be a c lip holding the axle in, remove the c lip pull the axle repalce the seal on the end of the axle tube, put it all back together and you ...
you change the rear pinion seal You'll need to remove the yoke from the rear end, you can use a seal removal tool, to remove the seal. Make sure you properly torque the nut down that holds the yoke on
Question about Cars & Trucks
...rear pinion seal, it isn't too bad at all. You just have to drop the drive shaft, remove the pinion nut and pull the pinion, then knock out the old seal and hammer in the new one. Going back together ...
Question about Chevrolet Silverado 1500
...Remove rear wheel (1007) and tire assembly. Remove rear disc brake calipers (2552) and rear disc brake rotors (2C026) . Clean all dirt from area of axle housing cover with a wire brush and/or cloth. ...
...Remove the rear disc brake rotors (2C026); refer to Section 206-04 . CAUTION: Once the differential pinion shaft (4211) has been removed, turning the differential case (4204) or an axle shaft (4234) ...
...Remove the rear disc brake rotors You will have to remove the brake caliper to get rotor off. 8. CAUTION: Once the differential pinion shaft (4211) has been removed, turning the differential case ...
...rear pinion seal is leaking how can I replace it myself remove the driveshaft, clean the nut holding the driveshaft coupler to rear end pinion shaft, mark it,now loosen the nut counting the turns so ...
...rear ABS remove sensor from axle housing) remove rear differental cover, remove locking bolt, (5/16) remove center rod, remove axle retainer clip, pull axle out, pull seal out, using a socket drive ...
...remove a pinion bearing from a 1985 14bolt 9 1/2 ring gear chevy realistically?? take the rear end apart , you can purchase the bearings and seals as a kit, that will include carrier bearings pinion ...
2,477 questions posted
Usually answered in minutes!
4,236 Questions
159 Questions
130 Questions
67 Questions
56 Questions
