2004 Chevrolet HD 6L VORTEC: Replaced the knock sensor and am in need of the TORQUE spec for tightening the new knock sensor... HELP?? Thanks! the torque spec is 15 ft lbs. hope this helps. Thanks Ray
torque specifications transfur case Anon, Torque specifications Transfer case bolts. Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by ...
torque for 2006 chevy 2500hd cv axle nut just make sure its good and tight,i have never had to use a torque spec for that.
2005 chevy 4x42500hd i am looking for torque spec on the rear axle. the rear axle seal is leaking. Hi.. On your 05 Chevy 4X4 2500HD. The Pinion Yoke Nut, 9.75" Axle. the torq spec. is 370 Nm. -- 273 ...
torque specs and procedures It's a question of access. Look underneath vehicle for any obstructions (Otherwise, obstructions must be removed first, e.g. support brace, splash shield, stabilizer, etc,
Question about Chevrolet Silverado 2500HD
Torque specs and sequence of head bolts 2004 chevy silverado 2500hd with 6.0 Go to autozone.com and become a member of their web-site. It is FREE. You can then access repair info for your vehicle. ...
need the torque specs for a 2004 chevy 2500hd for upper ball joint lower ball joint outer tie rod pitman arm idler arm axle nut hope this helps...
where are the knock sensors located on a 2002 chevy silverado 2500hd 6.0 engine? Knock sensors as a rule of thumb are positioned right beside a piston on the the block. It should be on the opposite ...
what is the torque spec for the front axile nut for a Chevy Silverado 2500 HD Tighten the nut to 250 Nm (184 ft. lbs.).
i need the torque specs for upper and lower ball joints on a 2005 chev 2500 hd 45ftlbs
206 questions posted
Usually answered in minutes!
241 Questions
48 Questions
21 Questions
5 Questions
4 Questions