...the hood, drain and remove the radiator, remove the belts, loosen the bolt into the balancer, replace part way, hook up a harmonic balance puller, tighten until balancer come free, remove
...and bled the coolant system of air..Long story short, I killed the Opti-Spark..Diag code 16..Replaced complete Distributor,,Still no Spark..Replaced coil..Replaced Ignition Module..Still no ...
...The dealer said it will cost $600. My research indicates that the part cost about $50.00. Can I replace the FTSU myself? If so, how do I replace it. the sending unit is in the tank. jack it up ...
how to replace fuel pump on 1986 corvette remove fuel door, rubber boot, take out bolts from sender,pull up sender from tank,replace pump and screen on the end.replace pretty easy on vette.
Question about Chevrolet Corvette
my corvette shut down when i remove the feet from the gas pedal sound like vacuum leak check replace all old vacuum hoses replace pcv make sure its getting vacuum.make sure spark plugs and wires been ...
1991 Chevy Corvette will run if gasoline is spayed. I have replaced plugs, distributor cap, condenser, wires and plugs. Replaced fuel pump, fuel modular, got 39/40 fuel pressure on gauge, test ...
how do you replace the rear brake pads on a 1994 corvette? is there a special tool you need to remove the e-brake cable? On my 90 it was this easy. Raise car Remove wheels Open bleeder and spread pads
HOW TO REPLACE WATER PUMP ON 84 CORVETTE Two part video and a one part video in the link. ...
Question about Chevrolet Corvette
have no spark on my 1989 corvette 5.7l replaced just about everything fuel pressure is 45lbs and holds replaced coil cap rotor spark plugs and wires set timing and replace icm in distrubutor and still
257 questions posted
Usually answered in minutes!
178 Questions
181 Questions
156 Questions
142 Questions
137 Questions