...EGR valve new PCV valve new fuel filter new throttle position sensor and some other odds and ends check compression, at that many miles the exhaust seats could be wearing up into head causing valves ...
Question about Chevrolet S 10
...EGR valve by pulling the vacume line off and pushing up under the valve put your finger over the vacume line hole and release the valve, if it returns to normal position then its bad if not its good. ...
egr valve troubleshooting I have a 1988 chev S10 truck.Lately ive had a problem with power and acceleration.It has no where near the power it had before.Also when starting the engine it sometimes ...
...egr valve located on 1983 chev s10 blazer 4 cylinder model the EGR valve is located between 2 & 3 cylinder on intake manifold and between Carb and valve cover it has a diaphragm cover about 3 ...
...EGR valve is most likely dirty pull it off and clean the pintal valve with a tooth brush and some berry-mans chem-tool carburetor cleaner, the valve will have carbon build up in the valve where the ...
EGR (exhaust gas recirculator) valve problem. Symptoms are rough idle, and surging and stalls. What happens is sediments from the exaust manifold get sucked up into the valve when it opens, then stick
egr valve, egr solenoid valve, fuel injector, pressure regulator pts on throttle body, iac vavle, canister filter have been replaced. dissasemblesd throttle body and cleaned very light black film off.
606 questions posted
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
747 Questions
686 Questions