2000 Dodge Intrepid "replace blower motor" Questions

Ad

Question about Dodge Intrepid

1 Answer

...my 1995 dodge intrepid but it still does not work ? What next IF IS THE HEATER A/C BLOWER YOU HAVE TO REPLACE THE RESISTOR IS BEHIND THE BLOWER MOTOR,IF BLOWER MOTOR GOES BAD YOU HAVE TO REPLACE ...

Ad

Question about Dodge Intrepid

1 Answer

...blower motor located and how do I replace it? 1.disconect battery 2. remove lower right undre panel silencer duct 3. remove the blower moter connector from the resistor block 4. squeeze the blower ...

Ad

...replace the appropriate gasket/seal. To troubleshoot the blower, you will need a voltmeter and a schematic. Measure the voltage to the blower motor with the switch in multiple positions. This will ...

Question about Dodge Intrepid

1 Answer

...control switch behind the panel or the fan motor thats bad ? It could be the the fan motor relay if you replace the relay and it still doesn't work then its the blower motor needing to be

...blower motor is the easier to replace, but the good thing is that they are next to one another, so when you are replacing one the other is right there. One thing that you can try as a quick fix for ...

...blower fan housing under the dash. if it is burned out, it will cause it to only operate on full load. replace this unit. look under the glove box to see this unit. should have about 5-6 wires giong ...

Question about Dodge Intrepid

2 Answers

...replace fan control switch beside the heater blower motor is a module bolted to the heater assembly. this module is called a resister, This is the device that limits power to the motor and is what ...

Question about Dodge Intrepid

1 Answer

...and have no control to stop it or turn it off. I disconenected the battery for 10 minutes but still not working. replace the blower motor speed control resistor, it is located near the blower

where is and how to replace blower motor 1997 dodge intrepid the blower motor is under dash,behind glove box,there are three screws holding up.

Question about Dodge Intrepid

1 Answer

My heater fan only works on high 100%: This is the Blower Motor Resistor that needs to be replaced. It is located adjacent to the Blower Motor. You will have to take the Dash Glove Box out to access.

Not finding what you are looking for?
2000 Dodge Intrepid Logo

1,163 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...