location of the iat sensor for a 2005 dodge dakota v6 It on the engine manifoldon the left side of intake manifold plenum use diagram its number 3
...quote on the parts, make sure you ask for an upper enine kit, not just a head gasket. this way youll get gaskets for intake, exhaust manifolds, plenum, and intake gaskets, as well as the head
...intake manifold, modern fuel injected cars and trucks (gas engiones) have a upper and lower intake manifold, the upper section is called the plenum. It is the upper intake that looks like aluminum ...
...intake manifold by 3 O-ring gaskets. Push onto the back of the intake plenum near the firewall to expose a gap at the front of the intake plenum at the front intake manifold. Put 2-3 long flat ...
...intake manifold (this is the solid large plastic cover that covers the top of the engine when you remove the engine cover). There are many wires and small vacuum hoses to disconnect. Plus.., when ...
...intake manifold supports.8. Remove support brackets at the intake manifold front corners and MTV.9. Loosen upper fastener attaching throttle body to support bracket.10. Remove clips attaching EGR ...
...intake plenum assembly. It is combined with the Manifold Absolute Pressure (AFS) sensor. 6.- This sensor is located in the air intake plenum assembly. It is combined with the Manifold Absolute ...
...intake manifold on 2005 Buick Lesabre You didn't post the size of your engine so please pick the appropriate one: 3.8L Relieve the fuel system pressure. Drain the cooling system. Remove or disconnect ...
replacing intake manifold plenum 2007 dodge magnum 3.5 intake manifold plenum, replace what the hell is the question here? nothing. remove old one and put new one in.
Question about Dodge Dakota
is there a torque spec for the plenum nuts going on the intake manifold studs? on 1991 honda accord 2.2 l there is a gasket in between plenum and intake manifold. 14 in/lb
599 questions posted
Usually answered in minutes!
1,021 Questions
870 Questions
712 Questions
723 Questions
618 Questions