2005 Dodge Dakota "replace front wheel bearing" Questions

Ad

...front wheel bearings are wheel bearing hub assembelys,and do not interchange Not sure what your wanting to know but wheel bearings on a 300m are sealed units. If they go bad you replace the hub ...

Ad

FRONT WHEEL WHILE YOU HAVE 1 HAND ON COIL SPRING..YOU SHOULD FEEL ROUGHNESS IN COIL SPRING ON SIDE WITH BAD BEARING..THESE BEARINGS CAN BE HARD TO REPLACE..USUALLY SEIZED INTO STEERING KNUCKLE..I HOPE

Ad

Question about Dodge Dakota

1 Answer

...front wheel bearing? The front wheel bearings on your Dodge Dakota allow the wheels to spin freely on the axle spindle. These sealed bearings may cause noise once they wear out, develop a pit on the ...

...front end and wheel brgs. DSay no more than that and leaave them to their work. They will call you when they need you. Ask for the old parts if you have them replace or repair.. My estimate. 20 to ...

...front of the truck grinding is never good, brake rotors could b shot. wheel bearings bad. most trucks r rear wheel drive, so these two problems r my guess, replacement of both recomended, new brake ...

Question about Dodge Dakota

2 Answers

front end. It builds in intensity as speed is increased and vice-versa. I have noticed, however, that if you make a right turn it stops, but comes back as you straighten the wheels again. No change is

Question about Dodge Dakota

1 Answer

...front wheel bearings.  If you have had the vehicle for a while and have not had any issues with them, now might be the time to check them out. Warning though, get good wuality replacements ( I ...

Question about Dodge Dakota

2 Answers

...replace the driver front wheel bearing on a 2001 dakota If it is 4X4 you will need to remove your hub assembly. Then If, 2 wheel drive you will need to remove your brake assembly. The dust cover to ...

Question about Dodge Dakota

1 Answer

front brakes,what tools do i need To replace rotors and pads, wheel wrench, sockets, hammer, with 4x4, remove wheel,pry pads apart, remove caliper, smack off rotor, and reverse install. 2x4, remove ...

...front wheels aligned? $100? $200? Thanks, John You have a wheel hub assembly with bad needle bearings. Make sure by getting the vehicle up to operating speed and cruise a curvy road. A quieting down ...

Not finding what you are looking for?
2005 Dodge Dakota Logo

599 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Dodge Dakota
2001 Dodge Dakota

1,021 Questions

1998 Dodge Dakota
1998 Dodge Dakota

870 Questions

1997 Dodge Dakota
1997 Dodge Dakota

712 Questions

1995 Dodge Dakota
1995 Dodge Dakota

723 Questions

1992 Dodge Dakota
1992 Dodge Dakota

618 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...