...after I welded on the exhaust. There was an electrical feed back through the system. Take the negative battery cable off for a couple minutes then put it on and the computer should have reset ...
...abs will reset, may have a bad wheel sensor.alot of things could make this light come on. Easiest way is to remove the power wire to battery for 10 minutes and that let the computer to reset ...
...i reset the computer on a 97 Dodge Ram, 318, 4x4 Hello. AAMCO repair shops, and many auto parts stores will now do a free computer scan. When you go to have the scan ask them to reset the computer. ...
...reset the computer and it dont run just pull one of the battery cables off that will clear it. just make sure all of your wires are connected and your getting fuel is all i can suggest with no more ...
...you aired up the tires.you can reset the whole computer by disconnecting the positive cable on the battery for 10minutes. light will go off,but do you have remote key just incase the alarm goes
...reset the computer in the truck. i dont need to be started to hook up computer. also something that bad will show codes even after changing battery if you crank it a bit.sounds like a cam or crank ...
Question about Dodge Ram 1500
computer need to be reset? My 2005 Dodge Ram 1500 acted like battery was dead. Charged the battery, started up, and drove a few times. Truck sat for month and it wouldn't start. Got a new battery, but
Question about Dodge Ram 1500
...reset computer after replacing dead battery 2001 Dodge Ram pickup: how to reset the computer after replacing a dead battery; the truck won't idle. disconnect the positive battery cable for 2 minutes ...
Question about Dodge Ram 1500
...reset. Come back to it later and it resets. An 5.7 hemi 4x4 quad cab big horn Hi there, sounds like an intermittent connection in the cluster assembly. This analog guages? Cluster comes out in one ...
Question about Dodge Ram 1500
...and P2317 https://www.google.com/search?q=Dodge+Ram+P2317 .. Dud you unhook you battery before changing th coil? You could try reseting the computer or do a hard reset on the
783 questions posted
Usually answered in minutes!
264 Questions
1,788 Questions
1,318 Questions
1,048 Questions
677 Questions