1996 Dodge Neon "cam position sensor located" Questions

CAM sensor too. The crankshaft position sensor is in the engine block behind the alternator / just above the oil filter. See diagram below. Clean it real well and check the wiring. Also make

...CAM sensor on a 1996 dodge neon? it will be on the left hand side at the end of the valve cover on the head. Hi, my name is John I will do my best to assist you. To Remove Disconnect the negative ...

where is the cam sensor located? The camshaft position sensor is mounted to the rear of the cylinder head.

...cam sensor on a 2005 dodge neon? The camshaft position sensor on the 2.0L is located on the rear of the cylinder head and bolted in place. It's been a while since I had one off but I believe you have ...

...POSITION SENSOR ON END OF CYLINDER HEAD..ENGINE CONTROLLER NEEDS CAM AND CRANK SIGNALS TO ENERGIZE THE SHUTDOWN RELAY..UNPLUG CRANK SENSOR AND CHECK VOLTAGE ON ORANGE WIRE..SHOULD HAVE APPROX 8V..IF ...

Cam Shaft Sensor Problems I need to know where this sensor is located on my 2003 Dodge Neon Where is the camshaft sensor and the knock sensor on my 2004 dodge neon Had the same problem before on my 04

...cam slide it back and retorque it to replace worn sensor 1 Park your Neon on a level surface. Engage the parking brake. Open the hood and loosen the bolt on the negative battery cable terminal and ...

...cam sensor had code p0340 camshaft position sensor a bank1 circuit malfunction. It started the other day I was driving on the highway and the engine light came on then i lost all compression in the ...

...end of the valve cover. It threads into the cover and will have a rubber hose attached also. Any further problems, give me a shout. 1996 dodge neon /no spark/ new cam/position sensor/coil and no ...

cam position sensor location find the location on engine Mounted on the backside of the cylinder head. Were is my crankshaft sencer at for my dodge neon my car cranks but won't turn over I think ...