2002 Dodge Intrepid "location cylinder 2 2011" Questions


...as a misfire in Cylinder #2. Where is the location of Cylinder 2? the dealership apparently has a bulletin that came out in 2014 about the misfire issues and it said to replace both


...Cylinder! BAD!!! - YouTube ? 2:01 www.youtube.com/watch?v=V8ttEEfmjpQ May 26, 2011 - Uploaded by wwjoshdew So depending on how good the clutch is, I will PROBABLY just replace both the slave cylinder ...


Cylinder. #8 rush_ad Reaction Location: Tampa Join Date: Nov 2011 Posts: 59 Mein Auto: 2003 530i View My Garage Take off the tires and play around with the brakes. May be you can identify the problem.

...2. Remove the intake manifold (Refer to "Intake And Exhaust System" in EM group). 3. Disconnect the injector connector (A). 4. Remove the installation bolt (B), and then remove the sensor from the ...

...cylinder.html ----------------------------- This will help. Thanks. I suggest to get a grasp on reality & go to a repair shop that has been at the same location for 25 years & have all the ...

Question about Dodge Intrepid

3 Answers

...cylinder housing. 2.Install the lock cylinder case housing to the steering column. 3.Install the lock cylinder case housing clamp and a new shear bolt. Ensure the tab is correctly positioned. ...

2.4, 4 cylinder located? double posted. i see your working backward. now (backup one post) why not scan the PCM,. or at least post the DTCs/ reported.???? why not< are you working on this car blind

cylinder.html ----------- These details will help. Thanks. I had the very same thing. It's just dirty idle valve. . Or what the correct name is . I forget now. It located on the top left of the intake

...cylinder 1 and 6 are not firing and I removed and properly replaced the old ignition coils now they are not sparking I was thinking maybe there was a problem with the spark plugs. Did you checked the ...

Question about Dodge Intrepid

1 Answer

...cylinder injector. A rail pressure sensor and a pressure limiter valve are adopted in the rail. 2) The rail pressure sensor (Pc sensor) detects fuel pressure in the rail and sends a signal to the ...

Not finding what you are looking for?
2002 Dodge Intrepid Logo

1,374 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts


Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides