1992 Ford Ranger "reverse stall" Questions

...many fords will have a plugged up trans cooler that will restrict flow and stall the motor when shifting into reverse. if you find the bypass fixes the problem then install an external trans

....the 15 minute drive includes freeway and city driving. when restarted with foot on brake and in reverse truck will run for 20-30 seconds before stalling again. the same with all the other ...

...reverse. The check engine light does not come on to give me a indicater or get a code. What could be the problem? Could be an issue with your intake. Try changing your air filter and clean your ...

...lights come on even if the switch is off. Running lights are on but dim. If I put the truck in reverse the lights get brighter and the truck stalls. When the truck is out of gear and running

My ford ranger 1992 is stalling everytime I hit the brakes when Im in drive or reverse I rep[laced the fuel filter and cleaned the intake no luck Hello David, you received very good advise from the ...

...If no-gear condition persists, open bell housing and verify that pressure and clutch plates are not reversed...such that when releaseing clutch pedal you are not actually disengaging rather then ...

...stall when shifted into drive or reverse A malfunctioning or damaged carburetor can cause the vehicle to stall when shifted into drive or reverse Improper ignition timing can cause the vehicle to ...

Have 95 E150 econoline van,108,000 miles.van stalls when shifted to reverse,if i wait for idle to rev up sometimes works.Now vans stalling at red lights,after 2 hrs. driving.Had throddle position ...

...not stall or shake in reverse. I have a 1989 5-series BMW which sometimes stalls after changing from reverse to drive. It also sometimes shakes when first driving in reverse before changing to

...after the truck is warmed up and you go from park to reverse and the rpms go up and down then tries to stall if not stall out This sounds like the transmission is seizing or locking up in