2006 Ford Freestar "liftgate trim remove" Questions

Ad

...unlocking on door and remote, nothing happens. I have to tie the liftgate down. Can you help me? faulty lock motor (solynoid) remove door trim to gain access when removed try unlocking with key ...

Ad

Question about Ford Freestar

1 Answer

...liftgate trim panel screw access plug. Remove the screw. Remove the liftgate door trim panel. Use Windshield and Molding/Trim Removal Kit to remove the liftgate door trim panel from the liftgate ...

Ad

...liftgate trim panel if there is a failure of the electric latch. Refer to Opening the Liftgate Without Electrical Power . 1 Liftgate Trim Finish Panel 2 Liftgate Trim Finish Retainer Clips (Qty: 2) 3 ...

...and Moulding Trim Removal Kit 107-R0401 or equivalent, pry pushpins retaining liftgate trim from the liftgate. Remove liftgate trim. Installation Follow removal procedure in reverse order. ...

...Trim Panel, Liftgate Door Removal Disconnect thebattery ground cable (14301) . On vehicles with a rear window wiper, remove the three rear wiper motor cover screws and remove the rear wiper motor ...

...liftgate trim panel. If equipped, remove the lift motor link Remove the upper frame molding Remove assist handle screws Disengage the hidden clips around perimeter of liftgate trim Disconnect the ...

...Trim Panel Replacement. Disconnect the liftgate actuator rod from the liftgate. Refer to Liftgate Actuator Rod Replacement. Disconnect the rear seat number 2 shoulder belt anchor bolt. Refer to Rear ...

...liftgate applique by turning the socket (1) counterclockwise. Remove the back up lamp bulb from the socket. Lift gate Applique Replacement Remove the lift gate trim panel. Refer to Lift gate Trim ...

...liftgate upper interior trim panel to expose the center bolt 3. Remove the spoiler to liftgate bolts (3) 4. Disconnect the stop lamp harness 5. Disconnect the rear washer hose 6. Lift the spoiler to ...

Question about Ford Freestar

1 Answer

...liftgate lower trim panel, by pushing in the center of each pin approximately 1⁄8 in. until it clicks, then remove the fastener. Insert a screwdriver or small prybar into the hole in the ...

Not finding what you are looking for?
2006 Ford Freestar Logo

582 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...