1995 Dodge Ram 2500 "bad ignition coil" Questions

Ad

1998 Dodge Ram 1500 has fire from coil but not to plugs. pickup seams ok. The ignition module is probably bad. Remove it, and take it to a local parts store, they will typically test it for free.

Ad

...pump fuse and relay, if it's OK, you have a bad fuel pump. About the no spark, could be many things Ignition coil, distributor (if so equipment) , main shaft position sensor, computer problem Good ...

Ad

ignition fire at the spark plugs with an inline spark tester for fire. also check the plugs for fouling condition. If you have not serviced the engine in a long time,then you might look at that as one

...ignition coil arcing from top boot to the housing, replaced the coil with a new one. had the battery tested found bad replaced that also. There can be many causes and it will not hurt to check the ...

...strap from the valve covers to the block and that fixed my problem. I also replaced a couple of badly corroded coils due to the grounding strap being

...bad ignition coil, bad igntion module, or pick up coil. First make sure the ignition system is getting power the next like cause would be a bad ignition coil. the least likely is a bad pick up

Question about Dodge Ram 2500

1 Answer

...bad distributor cap, bad rotor, bad ignition cable between the coil and the distributor cap, a bad Engine Control Unit, a bad distributor pick-up coil, or any of the wiring in-between. (see

Question about Dodge Ram 2500

1 Answer

...ignition coil, problem could be bad ignition coil or bad ignition module or pcm problems, best have vechicle code scan for pcm fault or crankshaft position sensor or ignition module

Question about Dodge Ram 2500

3 Answers

...bad ignition coil use only a name brand coil ,but it could be a bad computer but not very common check wiring to ignition coil A if it was good, substitute coil A and B then look to the recorded DTC ...

Question about Cars & Trucks

1 Answer

...by connecting an ohmmeter between the coil output terminal and the ignition coil negative terminal. The resistance should be 5000 to 7200 ohms. You may have a bad coil or bad ground or wire ...

Not finding what you are looking for?
Cars & Trucks Logo

335 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...