1998 Dodge Ram 2500 2WD "vacuum line connect transfer case" Questions

...just infront of the transfer case and check the vacuum lines to see if they are still connected. usually the problem is the vacuum lines have become caught on something and disconnected

vacuum at axle check the Vacum switchs(the plug with 4 vac lines) on top of the transfer case it will have 2 feed lines(grey & green) they conect in to the into the vacum harness on back of motor

...vacuum lines from the transfer case connect to the motor at 1995dodge ram15004x4 5.9 motor if you have a knob to activate the transfer case the vacuum lines will be from the engine inlet manifold to ...

...vacuum motor from the top of the transfer case. when u engage your 4WD the valves on the transfer case are opened by a switch on the transfer case. the lines coming from the switch cross the top of ...

...vacuum lines: The transfer case is typically controlled by a vacuum actuator that is connected to vacuum lines. Make sure the lines are properly connected and not damaged. Inspect the transfer case ...

...line is 2WD w/ vacuum is operation, Blue line is 4WD w/ vacuum operation ). If no vacuum at the lines, check them back to the vacuum shift solenoids your transfer case has to be broken because front ...

...vacuum line from the engine intake manifold should be connected to the vacuum reservoir tank. 2. The vacuum line from the vacuum reservoir tank should be connected to the vacuum actuator on the front ...

...this switch be replaced with out removing the transfer case It is on the driver's side on top. Three vacuum lines connect to it. 7/8 is the size and no you do not have to take the transfer case

...Vacuum line to the 4wd actuator from under the battery try runs along the passenger side frame to the vacuum harness that is connected to the vacuum switch on top of the transfer case, driver's side. ...

...vacuum line coming from the transfer case that is not connected and I can't find where it should go. there are four vacuum lines connected at the transfer case one goes to the intake manifold and two ...