1996 Dodge Ram 1500 Club Cab "check fuel pressure 5" Questions

...fuel port and push it in, just like if you would if you were letting the air out of the tires, and see if you are getting fuel. another thing to check is the ASD relay in the power distribution

fuel rack you can check the pressure as mentioned above however the fuel pressure will generally cause all cylinders to act poorly. PS. not to scare you but it very likely could be a blown head gasket

Check your FUEL FILTER 1st. Even if they did a pressure check. #2) Check to se if your PCV Hose is not Clogged up or Calasped.Also Change your PCV Vavle. #3) The next thing i'm going to have you check

...fuel pressure and volume checked as if its out of range it can cause this type of problem,also if the fuel filter is plugged it can cause this as well.have a tech try to start it when cold with a ...

...the nozzle sideways or upside down when filling the tank. Works well with my work truck..... take the fuel fill hose off the tank and check the tank screen . Could have debris. Hope this helps

...fuel pressure 48psi has good compression no codes with scanner or with the 3 cycle key procedure may start at times for a brief period 5-10 seco truck was running fine until rercent a/c recharge all ...

...fuses..Good. Need help, At a loss! It's almost never a pcm. You need to check things like the fuel pressure when this happens. I'd take it to a better shop as alot of tests require special

fuel pump. the purge solenoid is constantly clicking. help I think you have ruled out the engine with all the parts you have replace. The transmission torque convertor is in lock up mode all the time.

...fuel gauge is also reading incorrectly (not registering a full tank, seems to change every time truck is started). The other gauges seem to function normally (AMP, Temp and oil pressure at ...

...check fuel pressure with a pressure gauge to see if its within specs.it should be around 35psi and no lower then about 32psi.your problem sounds like a fuel pressure problem and the pump should be ...