1998 Ford Expedition "torx caliper" Questions

...caliper on a 2007 ford expedition xlt? It looks like either a hex or torx bit but I have tried up to 3/8" hex and T50 torx with no luck. It is a 9mm Hex Driver Sears doesn't have that 9mm is only ...

...lbs. ( 27 Nm). Tighten the caliper retaining bolts on the 1999-00 F-Super Duty models to 27 ft. lbs. (36 Nm.) Hope helps. the Torx bit that you need for that is a T-40 if memory serves me

...caliper to mounting bracket ? Use a long 3/8 flexhead ratchet & socket,torx driver, allen driver or whatever fastner you have If it is something like a 12mm wrench-- use a long one & break ...

caliper on a 04 expo? I am replacing the rear brake pads and rear rotors on my 2004 expedition does anyone know where to find a diagram of intructions on how to do this. and are there in special tools

...caliper with a 45mm torx and the cradle with an 18mm socket.Support the caliper with a zip strap or rope. If they haven't been done in a while or you live in salted road conditions be prepared to ...

...torx) Wiggle the caliper (or use a rubber mallet) to get the caliper off of the rotor. Pull the rotor off, if its stuck, nothing is holding it now except for rust, use a mallet and beat of it all ...

caliper to get to rotor.... 2005 Ford Escape front brake replacement You need a 7mm socket, which are available at auto parts stores. Is it hex (like an allen screw) or is it a Torx or Torx plus? Torx

caliper pins for brakes on 2003 chevy t50 is to small t55 to big is there a special torx needed to remove the caliper pins? they are not hex either. yes torx.

caliper torx head screw. Once you have the caliper torx head bolt loose and the other 2 nuts off, you can rotate the caliper. Using a C-Clamp, compress the caliper so that it is completely compressed.

...torx bolts that go from the inside to the outside of the vehicle. They are on the inner side of the brake caliper. lift the caliper out of the rotor. remove the brake pads. To install, you must first ...