2000 Ford Explorer "replaced iac valve" Questions

...replaced. The IAC valve is very easy to replace as it is on top of the engine. You can try removing it and clean it with carburetor cleaner. Reinstall the valve to see if it makes any difference. If ...

...replaced iacv and cleared code p1506. CEL came back same code, previously to that I cleaned mafs with mafs cleaner and removed throttle body and cleaned inside throttle body. Put it all back and now ...

vehicle starts but shuts off 2000 Ford Explorer XLT iac valve is probably sticking, simply peck on valve to see if problem alleviates - if so replace iac

...IAC) Valve sticking. ACTION: Replace the IAC Valve with a revised IAC Valve if no Diagnostic Trouble Codes (DTCs) are present. Refer to the following Service Procedure for details. SERVICE PROCEDURE ...

replaced iac car wont start if it does turnover replaced iac on 2000 ford explorer car wont start if it does turnover it wont stay running sounds like fuel pump the iac valve adjusts your idle if you ...

...replaced the mass air flow sensor. The engine seems to be getting plenty of fuel and good spark. We feel that there is another sensor that mite be bad. Can you make any suggestions. The most common ...

...replaced this sensor? The reason I ask is that sometimes the IAC can be cleaned; however, if this cleaning procedure is not properly done, the IAC can become damaged. The IAC is located on the ...

...you look down in the holes and its gummed up with black stuff it should be replaced as this may also cause your issue. Your IAC will look something like this and be attached to the side of the ...

...iac error and an engine misfire, i have replaced plugs and wires already and tried cleaning the MAF the iac code has nothing to do with the maf . the maf is your mass air flow sensor and it is in the ...

...obd2 tester and the code said p-1506- idle air control speed error Are you experiencing an idle problem? most common problem is the IAC valve motor is becoming sluggish. Recommend replacing the