1996 Ford Ranger SuperCab "manual clutch problems" Questions

...with no adjustment to the clutch performed by me. If the clutch is a manual clutch you might be able to adjust the cable. It yours is hydralic (and I think it is) you will have to replace the

...Manual Trans. My clutch pedal is nearly all the way up to engage clutch. Why is this and can it be adjusted? Only 74,000 on it. The first thing I would do is to replace the master cylinder as the ...

manual gear box if you have replaced the clutch , t will be a clutch plate put in back to front If it is hydraulic clutch ,it will be a master cylinder or slave cylinder problem if it is cable clutch

...hydraulic system. When it's leaking oil the pedal sticks to the floor and has to be pulled back manually. Because it's designed to be fail safe, it still works but only for some time till all ...

...manual transmission. Went to go to work, depressed the clutch, put the truck in 1st, released the clutch, pressed the gas pedal and nothing, engine just revved up, but went nowhere. Shift lever moves ...

...i have change clutch and pressure plate and there is a lot of pressure on clutch what else can be the problem 1996 Ford Ranger Workshop Repair Service Manual PDF Download get your car fix right ...

...clutch pedal 15 or 16 times according to the service manual I read.It could be difficult to shift because the clutch is not fully disengaging. Check fluid level if possible. --- The slave cylinder ...

...Manual Transmission Problem? I don't know exactly if it's the transmission or what. But either way, when I am accelerating and in gear (foot is not on clutch) it feels as if something is slipping. ...

manual trany when wld it went out. Can it be something more than the clutch Is it an Automatic or Standard transmission? Your description of the problem is very confusing. An automatic does not have a

...manual transmission changed fluid same problem won't go into first unless I go into another gear first. if rolling coming to stop will shift into first easily. Why? synchronizer needs replaced ...