1997 Ford Taurus "position key pull ignition 97" Questions

Ad

...the hole in the on position and turn the key back to accessory position . pull on key to verify it is locked in. my 97 oldsmobile aurora wont start says clean key and wait 3mins, how do i bypass ...

Ad

Question about Ford Taurus

2 Answers

...key all the way to the release position. one of the pins may have fallen out of its place and is not allowing you to pull the key out, try pushing it in and wriggling it while trying to get it out, ...

Ad

...switch is turned and pulled out. key has to be in ignition and in on position, on column there is a small spot for something to push like the diameter of tothpick, push that pin and slide tumbler ...

...can put key in run position, I think you would be able to remove lock cylinder. You have to pull the steering column  covers off to remove cylinder. There is a procedure, pretty easy. Good

Question about Ford Taurus

1 Answer

...key in start position. If it has a rectangular looking metal pin securing it, drill into the plastic part of the switch with a 5/32 drill bit about 1/2 inch back toward the lock cylinder to take out ...

Question about Ford Taurus

1 Answer

...key in the on position, then maybe it would think the key was the right key and I wasn't a thief. Column lock cylinder was changed as well as ignition switch (didn't solve the problem). Turned out to ...

Question about Ford Taurus

1 Answer

...position and we cant get the key to turn the ignition out of the lock position and start. Tried turning the steering wheel back and forth and turning the key with no luck. Used jack to get any ...

Question about Ford Taurus

1 Answer

...key. If the vehicle is an automatic make sure the shift lever is all the way into the park position. In both cases it could be the safety interlock is causing the problem. Depending on the mileage of ...

KEY TO THE RUN POSITION.AND PULL THE LOCK CYLINDER OUT.WHEN INSTALLING THE NEW CYLINDER ALIGN THE RETAINER SLOT IN THE HOUSING THEN PUSH THE CYLINDER IN UNTIL IT SNAPS IN POSITION. I lost the key .How

Question about Dodge Cars & Trucks

1 Answer

...the fuel pump. just install it and turn your ignition key to the start position. You may have to turn the ignition key several times but once it starts, the car should start normally after

Not finding what you are looking for?
1997 Ford Taurus Logo

1,440 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2001 Ford Taurus
2001 Ford Taurus

2,262 Questions

2000 Ford Taurus
2000 Ford Taurus

2,120 Questions

2002 Ford Taurus
2002 Ford Taurus

1,869 Questions

1998 Ford Taurus
1998 Ford Taurus

1,431 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...