...middle of the spring, or right next to it. Is this part fully compressed? If so, you will need it replaced ... if not, then you have a different issue. 3. Your tire might not be bolted on as tightly ...
middle of the motor and tranny 2 screws, there are 4 nuts honding the torque converter in there so you will probably need the help of someone to turn the main pulley as you look for those 4 nuts, take
remove front wheels of Acura 1996 3.2 TL I removed 4 front tire bolts but the wheel look like has big bolt nut on middle hold that wheel The large nut you see is most likely the axle retention nut. It
Question about Ford Taurus
middle in the rim which I think I do but I don't see a slot to put the wedge part of the tire iron in,also I tried putting the lug end of tire iron on the plastic tire nuts it fit but it turned only a
Do I have to take off the middle spindle nut to remove the tire? NO ,,JUST THE LUG NUTS
...remove tire middle bolt / nut ? If your talking about the nut in the front wheel, that's the axle nut and i am sure you don't want to take that out if your just trying to remove the wheel. The wheel ...
middle of each alloy wheel that covers the lug nuts. This plastic cover can be popped off with the flat/nubby end of the crow bar that comes with the jack. It fits perfectly into a slot on the plastic
can not remove tire because i don't know how to take thing in the middle of the hub off You can't remove the lug nuts because of a center cap?
...remove the rim or something? If you first jack up the right side with wheel chocks in place and set in park, and take off all of the lugnuts, sometimes the wheel gets stuck to the hub, in the middle, ...
...middle this rotor will slip over the hub and onto the bolt pattern like a typical old rotor. So do i need to remove that big nut? or is this plate just rusted to the rotor and that nut is not part of ...
1,440 questions posted
Usually answered in minutes!
2,348 Questions
2,262 Questions
2,120 Questions
1,869 Questions
1,431 Questions
