...oil pump sprocket diamond to the engine front cover diamond. Align the camshaft sprocket triangle to the engine front cover triangle. Here are the Timing Procedures from the service manual: Click ...
...pump pullies, the diamond aligns to the diamond and the triangle aligns to the triangle (the pullies have both). These should be perfectly aligned when the crankshaft pully line is at 0 deg TDC. If ...
Question about Ford Ranger
...when doing this job as you could crush valves if you have the timing belt removed**** You also have diamonds on the oil pump and camshaft that need lined up with the diamonds that are on the engine ...
...front cover (6019) . Align triangle on camshaft sprocket with triangle on inner timing belt cover. Align diamond on oil pump sprocket with diamond on inner timing belt cover. Timing Mark ...
...oil pump on the left side has two diamond marks on the sprocket and block; they must line up, and the two triangular marks on the camshaft sprocket and the rear timing-belt cover must also line
...How did you do the rest of the "overhaul" without knowing all engine specs? Crank at TDC, oil pump at 12 o' clock, (diamond) cam gear is marked approx 5 o' clock (triangle) on plastic
...diamond and has 4 bolts, one going to the battery, one to the ignition, starter, and I believe the coil. Locate the one coming from the ignition switch (where key goes) and see if it is sending power ...
...pump should be moved to the driver's side of the frame, and the a/c placed on top of the p/s assy. Remove the bolts (6mm) that hold the timing belt cover in place. Gently work your way around the ...
...front cover (6019) . Align triangle on camshaft sprocket with triangle on inner timing belt cover. Align diamond on oil pump sprocket with diamond on inner timing belt cover. Timing Mark ...
1,026 questions posted
Usually answered in minutes!
642 Questions
573 Questions
562 Questions
558 Questions
477 Questions