...a electronic control module , has the ability to set an store DTC'S - diagnostic trouble codes ! Transfer Case The four wheel drive system is an electronic shift 4X4 system that allows the
the 4wd light comes on but does not engage 4wd Most probable cause is the engagement motor on the transfer case bolted on the back of the transfer case. Don't get it from Ford (too expensive), try ...
...2-3 inches, put a mild 302 in it a c4 tranny with the A(stock) servo to back it a 1350 borg warner transfer case, and the 6.812 adapter on it to boot. They some how snaped the output shaft. I now ...
...on a 1999 ford ranger 4x4 off road 4.0 the 4x4 don't use vacuum. the front is auto lock when the transfer is engauged with the button. if the light don't which when pressed into 4hi or 4low. the ...
Question about Ford Ranger
...are turning switch on dash back a forth. Makes truck jerk when happening. changed hubs, motor on transfer case, no help. Garage wants to put a transfer case in next, I don't think it's the
...relay on 2002 Ford ranger four wheel drive The entire assembly is mounted to the back of the transfer case, it contains all the parts except the control module. so the fuse for my 4wd was
Question about Ford Ranger
1983 ford ranger transfer case engages but the wheel will not engage transfer case engages but the hubs do not i know the hubs are good you may have lock outs on your wheels these need to be engaged ...
1998 ford ranger does the ecm control the transfer case 1998 ford ranger xlt 4.0 does the ECM control the transfer case yes it does ... have seen 4X4 in the pinout ...(the plug that goes into the ECM.
1999 ranger transfer case module location location of transfer case module Center of dash behind the controls.
...locks up when i let off the gas does anyone have a solution to my problems? i was thinkin maybe transfer case but idk it probably is the transfer case of the rear
1,026 questions posted
Usually answered in minutes!
642 Questions
573 Questions
562 Questions
558 Questions
477 Questions