remove key switch you need to disconnect battery, remove plastic around steering column, and turn switch to crank position and insert small pin like a pick into hole on top of switch housing
remove the key lock cylinder,place the key in the lock and rotate clockwise to the start or run position,then push in the retainer pin and pull the key and lock cylinder from the ignition switch, when
...key lock on igntion 1999 2500 4x4 got it cant get the cyclider out does the ignition switch turn? Did you remove the top and bottom cover of the column by removing the torx screws? If so, there is a ...
...key is incerted an removed easily, but will not turn, all solutions remove switch that i have found thus far require switch to be in run position for removal The problem is going to be the ignition ...
Question about Chevrolet Silverado 1500
remove key battery will stay charged it sounds like even with the key in the off position something is still getting power and without the its not getting power I'd got to ur local parts store and see
Question about Chevrolet Silverado 1500
...key to the "on position after locating the one that is hot all the time, then find the thickest hot wire on the other side of the switch that is hot in the "on" position. The switch itself is located ...
...key and tumbler needs the steering wheel removed then you will clearly see a small screw remove it and the switch slides out. Now if under,remove the knee bolster and you will see the switch on the ...
...key. After years of use the spring collapse. Disconnect the battery,remove airbag,remove steering wheel, remove column cover,disconnect orange wire under the dash,turn ignition switch to running ...
...bad key switch make truck hard to put in gear bad how? remove switch, cycle it with key and listen, hear clicks ? if not, lubricate, graphite best, tumblers should move freely and pins snap into ...
1,965 questions posted
Usually answered in minutes!
4,236 Questions
159 Questions
130 Questions
67 Questions
56 Questions