2001 Dodge Intrepid "pull trigger" Questions

...pull up on my database,. The P0441 is for an evaporative leak in your fuel purge system. Vapors are continually pulled from the fuel tank on later model fuel injected vehicles. A leak in this system ...

security system, it may have reset and armed itself. If that is the case then go under the dash and pull out the fuses to the alarm system, that should deactivate the system. Just disconnect the alarm

...pull it out. If it pulls out with little effort (even if it springs back in), replace the actuator. Jammed wastegate - Disconnect the wastegate actuator pushrod and swing the wastegate arm on top of ...

...camshaft positioning sensor wil be located on the end of your valve cover on the oposite end of the pulleys and gears. Look for plugs around that area that are right on the cylinder head underneath ...

...the trigger, the trigger still works but I can see the spring is stretched out. when the trigger pulls back after depressing it, it makes a clicking noise that im pretty sure it didnt do before. ...

...trigger pull on a 22 deringer oil You need to to tone the sear to be smoother but be careful if to much it won't hold well and it will go off without pulling trigger it doesn't take much if you try ...

...valve is working and will not spray hard until you pull the trigger. If when you pull the trigger without the engine running a little spray them comes out, you'll then be able to start the

...pull the steering column handle to trigger the washer fluid, none comes out the jets. I have noticed that after parking, the driver side headlight fluid jet is kind of stuck open. I'm assuming those ...

how do I decrease the trigger pull on my Kimber Nothing You need to buy a lighter trigger spring. Several websites sell them. Just Google it and find them.

...and hammer seem to work properly but gun will not fire. Normal clicking sound only when trigger is pulled. It is as if firing pin does not contact the round. why is this even on cars and trucks... ...