...Sensor (AKA Neutral Safety Switch, Digital Transmission Range Sensor, etc.). The speed sensor is located under the van. You have to remove the Y pipe from the exhaust and the heat shield to access
transmission range (TR) sensor. the back-up lamp bulb(s) located in both rear lamp (13404) assemblies circuit wiring and circuit protection Circuit protection is provided to the transmission range (TR
...of the flywheel and is magnetized to pick up the "missing" teeth areas to determine the speed of your engine. "00 Buck" it's the transmission range sensor that tells the computer what gear you're
what is the name of the sensor above my drivers side axel on my 98 ford windstar mounted into the transmission output shaft speed sensor range sensor
transmission range sensor and it is located on the side of the transmission. It should be bolted to the tranny. Its a little box with a cable running to it. Probably passenger side, youll know it when
where is shift module if you mean the TRS (transmission Range Sensor) its under the intake breather on top of the transmission. the actual shifting is ECM controled
...windstar trouble code P0705 P0705 : Transmission Range Sensor Circuit malfunction. You may wanna replace it or check it its the switch that tells the PCM which gear the transmission is in. Good ...
...transmission range sensor which tells the ECM what gear the transmission is in neutral/reverse. Which was probably happened when you lost Drive gear yes it is on the top of the transmission where the ...
...GOOD YOU COULD HAVE A BAD TRANSMISSION RANGE SENSOR.BECAUSE THE TRANSMISSION RANGE SENSOR PART OF THE PCM IT TELLS PCM WHAT DRIVE GEAR YOUR CAR IS IN.YOU NEED A SCANNER TO CHECK TO SEE IF ITS
2,609 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: