do i have to remove intake to replace rear spark plugs on a 1999 ford taurus If it is an OHV engine, No. If the engine is a 24 VALVE DOHC motor then, yes.
24 valve Duretec Engine On a 2003 Ford Taurus 3.0L DOHC, this is with premium parts, from NAPA, spark plugs, wire's, fuel filter, serpentine belt, your car only take one belt, it drives all the pulley
Question about Ford Taurus
...24 valve and just changed the oil spark plugs and fuel filter. Now I'm noticing a slight ticking notice but not when at a normal running temp at an idle. ticking my be a lifter or a rod about to go ...
...24 valve give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual also try www.taurusclub.com wish ...
...a standard 3.0, If a 24 valve, your motor is likely trashed. try this site. you should be on step 9. check your fuel pressure. ...
...24 valve engine as a replacement for the original. The other day my friend borrowed it and drove to his house, got out, his wife got in. Put it in reverse backed out and it died on him. I am getting ...
...24 valve engine the it is easiest to remove the upper intake manifold and get to them that way. It is possible to do without removing the intake manifold but if you have big forarms like me you will ...
...24 VALVE DOHC MOTOR WILL NOT START NO FIRE TO COIL PACK REPLACED THE COIL PACK--CRANK SHAFT SENSOR--CAM SHAFT SENSOR&SPARK PLUGS-- BATTERY IS OK --APROX.50 PSI FUEL PRESSURE --CHECCKED ...
...24 valve engine. I have no spark to cyliders 3 and 4. I have also replaced the electical connector to the coil pack as well. All 4 wires have power and the yellow and white and the yellow and black ...
3,503 questions posted
Usually answered in minutes!
2,347 Questions
2,120 Questions
1,869 Questions
1,431 Questions
1,365 Questions