2003 Ford Taurus "high idle cause" Questions

...High Idle Problem http://repairhelpcenter.blogspot.com/2012/10/high-idle-problem.html ------- While stop engine idles like cylinder missing? ...

...idle so high when i start it this is normal, if the idle wasn't high (about 2,500 RPM) the engine wopuld stall out until it warms up to normal temperature. If it is above 3000 RPM for more than a few ...

high idle in 2003 taurus. Rpm's stay high until I brake for a minute and then it drops suuddenly. Could be a vac leak or a problem with the idle air control valve. I would check the valve to see if it

...high and surges? you most likely have a vacuum leak .please check the elbows for the pvc valve. some time they get soft and will devolve a hole.you can also get some carb spray cleaner .and when the ...

...idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 ...

...idle high befor it dies. you stated you had codes p0171 and p0174 these are lean codes for bank one and two, you said you found a vacuum leak and repaired it, the vacuum leak was mostly likely the ...

...idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 ...

...idle speed will likely be excessively high. Beginning with the battery negative cable disconnected from the battery, and with the throttle position sensor removed, place the sensor in position on the ...

idle too high when coming to a stop Check the cable that is connected to the idler control sensor it's a small thin black tube. But it tends to come loose causing the car to idle too high. Also check ...

high idle can be caused by the oxygen sensor being faulty. These are available cheap on E bay @ CBS automotive. I have a contour which had the same problem. I got two sensors for under $60.00 and have