2004 Ford Focus "change wire abs sensor 2001" Questions

Ad

...abs light stays on ,on my focus 2001 its not the censors had them changed on the front do they have them on the back and if so where are they been told it could be none reading bearings is that ...

Ad

...WIRE BRUSH ON ANYTHING THIS WILL TAKE OFF THE METAL AND LEAD FrOM THE BATTERY POST AND ALL CONNECTIONS RESULTING IN POOR CONTACT AND TIGHTNESS NEVER EVER USE THESE THE 0000 STEEL WOOL AND PB ...

Ad

Question about Ford Focus

1 Answer

Sensor lights are on need sensor wire information due to abs light stays on after brakes changed on 2001 VW Passat sensor light stays on likely due to broken wire when brakes were changed

...abs ring along with the hub when putting on the new rotors ? on the brake rotor is a wire. Most likely the connction is loose or you wore the brakes out enough to cause the sensor to wear into the ...

...change. Anyway, of resetting No. What you can do is look for one of the abs sensors that is either disconnected at the wheel hub or use an ohm meter on the connections to test the resistance. If you ...

Question about Ford Focus

4 Answers

...ABS light is a broken wire to one of the front wheel speed sensor, or the sensor itself is bad. The sensor is part of the hub/wheel bearing assembly. A problem in the ABS causes the traction control ...

...abs light still on You have to component test,as well as check wiring & tone rings You don't change parts based on codes You have to find the problem first,the code doesn't tell you what is ...

Question about Ford Focus

1 Answer

...abs sensor also changed. how come the lights don't go out? Pads and rotors will not make any of these light to come on.The sensor will but did you get the codes to see what the code was?This is what ...

...abs sensor is on and my brake lights are on. I changed out the speed sensor, but I still have the same issue. I may need new wires too. What could be the problem? I, feel sorry for you, after reading ...

...wire to the ABS wheel sensor during the brake job. Also taking the brake fluid cap off and checking the fluid level, and just reseating the cap may turn off the code. Check these things first, check ...

Not finding what you are looking for?
2004 Ford Focus Logo

1,391 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2003 Ford Focus
2003 Ford Focus

2,055 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2006 Ford Focus
2006 Ford Focus

840 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...