...ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: Remove the ignition switch wiring harness. Unbolt it from its position. Bolt the new switch into ...
...key turned in ignition. But when you twist it to start, nothing happens. Lights don't dim, no clicking sound of a relay, just silence and no start. 1996 Dodge Neon Have you checked the starter relay ...
...key can be completely out of the ignition and it still wont shut off. We eplaced the ignition switch and took the remote starter out, we also just put in a new battery. It was working fine after we ...
...you have an ignition fuse blown. Check and make sure the switch is plugged up and have power coming out of it with key on. If no power coming out check the fuses then the switch. should fix the
...ignition has bent pins insert key tap it with malat once key turns take car to lock smith for repair they can sand the pins once fixed remove some of the keys off your ring do not remove key b4 ...
...to do Probably your ignition key is bad.Try another key that you may have.If the other one works neither then you have a bad ignition switch.Do the indicators of speedometre light up when you key in
Question about Dodge Neon
...security system is keeping it from starting now The key switch may be drilled out but the ignition switch may not be ingageing the power it needs for the electrical system ,replace the key cylinder
...will have a new key that will start the car only, and your original key will only open your doors and trunk. A new key and ignition cylinder is a inexpensive parts old by many auto parts
cam pos sensor and crankshaft pos sensor so far ,.. any ideas on what might be causing this problem Have you looked at the ignition module, or and ignition switch. Not the key switch} ignition switch
1,099 questions posted
Usually answered in minutes!
861 Questions
762 Questions
743 Questions
606 Questions
544 Questions