2001 Chevrolet Silverado "2010 dash engine hot" Questions

2010 equinox 2.4 4cyl ECT sensor location please I would like to replace due to my dash saying ac off due to high engine temp The coolant temp sensor is #9 in the picture. How hot does it get in ...

...2010 Ford Edge, the air is starting to blow warm on the driver side and cold on the passenger side. What could be the problem? the heater door under the dash isnt closing all the way,turn thermostat ...

...2010 Chevrolet Impala and a light come on the dash that said car hot A/C off and then a check engine light with that and the A/C would not work.So i had the code read and the code pulled up ...

2010 Chrysler 300's windows fog up really badly when its cold outside My windows fog up really badly when its cold outside, to the point where I can't see at all while driving, I have to pull over and

...dash must be removed, to get to this box. I have your SM here. ,min just failed last month, 2010 GC My jeep has 3 dampers, blend ,mode and recirc. any can fail and do. (temp is really blend) the car ...

...2010 Buick Lucerne. Not getting a temp reading on my thermostat on the dash. My heat works fine in the car. Which sensor is causing this. Is it easy to replace? What makes you thing it's a sensor ? A ...

...dash of ford mondeo 2010 2ltr tdci no difference in performance when you switch engine off it doesn't come back on for a couple of hours The symbol means warning you need work done on the engine. AS ...

...2010 and what happens when the outside temps get up in the 60s and above and I have the same problem. They said we will try and work with you on a case by case basis. Well here it is and we drove it ...

...2010 . Fault code DF980 . Faults says Proportional richness program , the sensor is faulty . Has anyone had same fault and point me in the direction we're the sensor is faulty Come up on dash check ...

...dash come on, can hear fuel pump click on. Can NOT hear the starter spin either. Wondering if the security system is locked not allowing the jeep to start or the starter to spin. If the crank sensor, ...