2001 Chevrolet Silverado "replacing tow button wire" Questions

...BUTTON IN IT.? tow haul mode will not work on my 2005 chevy silverado, the light will not come on or anything and i tried pushing it while driving and the tranny still shifted the same.. Likely wire ...

...button on the end of the auto shift lever wont work for the tow the light in the dash will not come on either . would it be a bad fuse and if so were would that fuse be? this button is for when you ...

tow bar. Had flashers on. Stopped for gas, turned flashers off. Went to leave and now do not work. If I push hazard button down about 1/3 of the way flashers will work.? But no turn signals. What else

...TOW/HAUL BUTTON ON MY GEAR SHIFT WILL WORK FOR MY TOW/HAUL BUTTON ON MY 2005 F250 SUPERDUTY GEAR SHIFT HANDLE WILL WORK FOR WEEKS AT A TIME. THEN THE LIGHT ON THE DASH DOESN'T TURN ON & THE ...

...replacing the solenoid. This can be a costly and complicated repair, so you may want to consult a professional mechanic before attempting it. A third possible cause is a low or weak battery2. ...

...tow in haul button is on but we never turned it on. So is there possibly a short in it? It sounds like a short you can test by removing the NEG. cable from the BAT. put a volt meter from the POS. red ...

tow/haul light will not work when I push the button. Everything else seems to be doing fine. I am an old school mechanic and have rebuilt many older GM transmissions, but I am lost on the newer stuff.

...button switch alot of times this goes out it will get stuck due to use and quite activating i took mine off and sprayed some "penatrateing lubricant" on it and pushed it in and out a few time and got ...

2008 Grand Caravan won't start. The lock/unlock 2008 Grand Caravan won't start. The lock/unlock and PANIC buttons work on the remote but when insterted into the ignitionn the van does not start. I am ...

tow and haul button don't work how do i check it button quit working light in dash don't come on More than likely the wires are broken at the base of the column shifter. If they are you need to ...