...spark to cylinders 2 & 3 than it is not the cranks sensor. Cylinder 1 & 4 are on the same coil and cylinders 2 & 3 are on the other coil. Replacing lithe coil pack will likely solve you lack of spark ...
...connected to the coil while cranking the engine and discovered all cylinders spark and have fuel. Cylinders 2 and 3 ignored the fuel; 1 and 4 seemed to be mistimed possible skipped a tooth on ...
...2. Spark plug leads - if you've replaced the sparks and still no luck, consider replacing the leads as well. 3. Fuel pump - you may not get enough fuel to the engine 4. O2 sensor - connect a ...
...spark on cyl. 2 and 3 but no spark to cyl. 1 and 4. Replaced coil pack but still no spark on 1 and 4. where to check next? Have you had your Battery,starter and alternator checked? if starter or ...
...Spark Plug Socket, a 12" extension and socket handle to rach teh plugs to remove them and install the new ones. I prefer to gap mine at .32 but I believe the book calls for .34. As far as plug wires ...
...spark plugs, wires, coil box, and used a fuel injector. Plugs 2 and 3 aren't firing but 1 and 4 work just fine. I'm wondering what should be my next step in getting 2 and 3 to fire. how bout check to ...
Question about Dodge Neon
...2 are getting no spark.above the odometor it sais no bus fuse even after turning the ignition off and on x 3 and waiting x 5.the bus fuse has been replaced and checked.the car turns over great and ...
spark plugs #2 and #3 plugs had oil in the cylander tubes. Could this possibly be why it won't turn over now, or does it sound like something else. I mean would changing the spark plugs and the wiring
...2 and 3 not firiing. replaced coil pack no change i would start by checking plug wires and spark plugs for proper gap replace if necessary check for compression in all cylinders i dont know what your ...
698 questions posted
Usually answered in minutes!
861 Questions
762 Questions
743 Questions
710 Questions
606 Questions