1998 Dodge Neon "spark 2 4" Questions

...spark to cylinders 2 & 3 than it is not the cranks sensor. Cylinder 1 & 4 are on the same coil and cylinders 2 & 3 are on the other coil. Replacing lithe coil pack will likely solve you lack of spark ...

...spark on cyl. 2 and 3 but no spark to cyl. 1 and 4. Replaced coil pack but still no spark on 1 and 4. where to check next? Have you had your Battery,starter and alternator checked? if starter or ...

...connected to the coil while cranking the engine and discovered all cylinders spark and have fuel. Cylinders 2 and 3 ignored the fuel; 1 and 4 seemed to be mistimed possible skipped a tooth on ...

...2. Spark plug leads - if you've replaced the sparks and still no luck, consider replacing the leads as well. 3. Fuel pump - you may not get enough fuel to the engine 4. O2 sensor - connect a ...

...2.o l When facing the engine compartment, the pcv valve will be located on the right end of the valve cover. It threads into the cover and will have a rubber hose attached also. Any further problems, ...

...rings for the bolts which hold the cover down. Total parts inluding spark plugs was about $60 Canadian. Mechanics had quoted 1/2 hour labour. For reference the Haynes manual shows this job on page ...

no spark on 2 and 4 coil both coils replased has same problem try replacing the crank sensor..have seen this before

...Spark Plug Socket, a 12" extension and socket handle to rach teh plugs to remove them and install the new ones. I prefer to gap mine at .32 but I believe the book calls for .34. As far as plug wires ...

...2 and 3, but not #1 or 4...same place is busted and oozed stuff out of ....replaced timing belt, tensioner, spark plugs, fuses, checked wires,and tested each coil individual, still no fire on back... ...

...spark plugs, wires, coil box, and used a fuel injector. Plugs 2 and 3 aren't firing but 1 and 4 work just fine. I'm wondering what should be my next step in getting 2 and 3 to fire. how bout check to ...