2000 Ford Windstar "switch back" Questions

...switch back under the dash, and remove the connector. To test, use the pinouts shown on the diagram below and the switch pictured. Basically, pin 2 should have 1.2 Kohm resistance to pin 7 in the OFF ...

...and a little back and forth motion will fix things. Otherwise the switch has to be replaced. there is a brake light switch located on the brake pedal arm about half way up. it just needs ...

how do you unlock back windows in 2001 windstar van back windows in van will not open. there is a switch on the drivers door window switch

switch itself. You can access the back of the control panel by taking out 4 screws and pulling it forward. Pull the vacuum connector off the switch and start the engine. The black line coming into the

...from the actuators on the end of the manifold back to the vacuum switch and test it for operation. I think it hangs off the back of the inlet system close to the firewall (really hard to get to)

power locks don't work with any switches on the doors. The switch on the back hatch door does work probably need to replace master switch on drivers door.

back off? Hello, Thats definitely why the fuelpump is not working. I would try a little WD40 on the switch. If you unplug the connectors and remove the switch you may be able to tap the switch and get

...back up with either the driver's side or passenger's side switches. Would it be the switch or the motor that needs to be replaced, and if the switch which one or both?? Sounds like a weak ...

...keep runnin down the battery. this is what triggered us changing the signal switch please help im lost and i have 3 kids i need my vehicle working replace multi function switch put other relay back ...

back on a 99 Ford windstar The inertia fuel shutoff switch is located behind the driver side scuff panel. An access hole is in the scuff panel to access and reset the fuel shutoff switch. NOTE: In the