2000 Ford Windstar "torque converter switch" Questions

Ad

torque converter circuit problem. how do you fix this on a 1998 ford windstar 3.8l engine? U have a problem in the transmission torque converter clutch control circuit, most likely the solenoid switch

Ad

Question about Ford Windstar

1 Answer

...help. This is a very common way that a torque converter fails. The transmission will need to be removed and a new torque converter installed. Hope this helps leave feed back thank you ...

Ad

...torque converter in u gearbox has gone best to lok for a replacement gearbox Check your Neutral Safety Switch. It's located on top of the transmission on the drivers side. It is with the shift lever ...

Question about Ford Windstar

2 Answers

Torque Converter Clutch System Performance 1744 I would clear the codes and read off any new codes in order to pin point any error. Could be the torque convertor getting too hot and sensors are trying

...the transaxle odds are its above 40mph when your feeling this, which is a torque converter shudder which can be resolved by new mercon 5 fluid and additives like lubegard or smartblend or Dr

...torque converter and i was back on the road driving. The symtom was that it just stopped! We drove to the store fine and came back out to go home and it started fine but would not move. I hope all ...

Question about Ford Windstar

1 Answer

2001 tj code p0740 obd is reading p0740 That is the torque converter clutch circuit. Have the torque converter switch and/or relay switch checked, or torque converter lock up switch.

...torque converter on a 99 jeep Cherokee cant unlock torque converter when internal malfunction occurs torque converter has to be replaced. sound like you have faulty TRANSMISSION TCC SOLENOID SWITCH. ...

Question about Ford Windstar

1 Answer

...to torque converter / brake switch B--circuit malfunction===causes--wiring--torque converter/ brake switch--ECM/TCM. The problem may not be in the brakes circuit but in the torque converter

...torque converter located torque converter stuck off there is no electric torque converter you mean the lock up for torque which is inside the transmission pan you should see connector outside the the ...

Not finding what you are looking for?
2000 Ford Windstar Logo

2,289 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Windstar
1998 Ford Windstar

1,797 Questions

2001 Ford Windstar
2001 Ford Windstar

1,796 Questions

1999 Ford Windstar
1999 Ford Windstar

1,174 Questions

2003 Ford Windstar
2003 Ford Windstar

996 Questions

1996 Ford Windstar
1996 Ford Windstar

582 Questions

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...