Question about GMC Jimmy
ignition switch, and passlock module undder the dash. Had the same problem. It was the security system shutting off the fuel to the injectors after the initial start but dies in one second. VERY
...ignition it starts for a second then dies. why? the problem is the passlock .This system allows starter operation,then kills the injectors 1-2 seconds after startup.The key cylinder housing has a ...
...ignition switch . The design of the passlock™ system is to prevent the vehicle operation if the proper ignition key is not used in order to start the vehicle. The mechanical key, in normal operation, ...
Question about GMC Jimmy
...Passlock™ DTCs. Turn the ignition switch from the OFF position to the CRANK position, and then to the RUN position. The vehicle will start and then stall. Leave the ignition ON until the security ...
Question about GMC Jimmy
...ignition key turns the lock cylinder. The cylinder rotation produces an analog voltage code in the passlock™ sensor. This voltage code is received by the BCM. The BCM compares the voltage code to the ...
...ignition key set and pair the new parts to the car. The problem might be your Vats security system. This causes the car to either "not start" or "shut down" while running, or start for 5 seconds and ...
...passlock light is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. ...
Question about GMC Jimmy
Passlock?"¢ Sensor The ignition lock cylinder fits inside the ignition lock cylinder case and operates the ignition switch when turned by a key with the proper mechanical cut. When the ignition key is
Question about Cars & Trucks
...ignition switch ?€¢ The passlock?"¢ sensor ?€¢ The Body control module (BCM) ?€¢ The security telltale ?€¢ The vehicle/powertrain control module (VCM/PCM) The ignition lock cylinder is located at the ...
Question about GMC Jimmy
...ignition cycles). My info shows you have passlock security system. It's the tumbler that communicates with security system, not the key. The key is just a mechanical key. The passlock sensor if you ...
1,950 questions posted
Usually answered in minutes!
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions
768 Questions