2000 GMC Jimmy "oil pressure switch" Questions

...OIL PRESSURE MY OIL PRESSURE GUAGE IS FLUCTUATING THOUGH THE DIPSTICK SAYS FULL AND I CHANGED THE SENDING UNIT SWITCH, AND SOMEONE TOLD ME TO TRY CHANGING THE PCV VALVE PCV valve isn't likely to ...

...oil pressure switch/sending unit. It's a single wire terminal with plastic connect sensor from the engine block. This switch serves two functions. 1) provide oil pressure reading 2) disable the fuel ...

...the oil pressure switch is located in a 01 GMC Jimmy Hello janczuk69, Below is an image showing the oil pressure switch at location number 5 below the distributor. I hope this helps. Regards, ...

what fuse is it for 1999 4.3 jimmy and where is the oil pressure switch oil pressure switch close to starter connected to the engine block. confused what fuse do want to know.

oil pressure switch (OPS). The switch is designed to close and complete a path to ground for a light, the problem is it closes aroung 3psi. Normal oil pressure is around 30, at 3 psi the cam and crank

...oil pressure sending unit. That is what actualy sends the voltage to the fuel pump however the sending unit has a switch inside of it that needs the oil pressure to be high enough to trip the switch ...

...oil pressure switch in parallel with fuel pump relay, so if that switch is functional and has voltage, once you crank it enough to bring up oil pressure, the pump should run even without the relay. ...

my oil pressure gauge does not go to zero when the car is turned off, can I reset it on a 1998 jimmy Replace the oil pressure switch

...OIL PRESSURE SENSOR LOCATED. DIFFERENT SITES ARE TELLING ME THAT THEY BOTH ARE EITHER BEHIND THE DISTRIBUTOR OR IN FRONT BY THE OIL FILTER HAVING TROUBLE FINDING WHERE THE 2 SENSORS ARE BECAUSE BOTH ...

...Oil pressure switch activates the supply pump. Replace the oil pressure switch.. New & Need good rating please. in this case i would say you have a broken wire to the pump,check the wire/retrace ...