2002 Oldsmobile Alero "bolt holds caliper" Questions

...a c clamp and put the threaded part in the caliper and squeeze it open all the way to put the brake fluid back into the master cylinder put the new brakes on and bolt it back together. hope this ...

lower brake caliper mounting bolt holding the brake caliper to the caliper bracket with a socket wrench. Pivot the bottom of the caliper upward away from the bracket to access the brake pads. good-day

I have 2004 alero right front caliper bracket bolts keep sliding out when tighten up how do I stop from sliding to keep rotor from wobbling?????? Would help if i knew what you were doing ,but i think ...

...bolt which is holding the caliper in place, and its rounded off really bad, first soak it and the area where it threads into with a good penetrating oil (WD-40, Liquid wrench), let it sit for about 2 ...

...are easy,1.jack up the car and support it on stands 2. Remove tire/tires 3. Remove caliper mount bolts and slide calipers off off drum (you may need to wiggle it around some and fight with it to ...

...caliper so as not to damage the pipe ,remove track rod end and then the two bolts on the bottom of the suspension leg ,and it may just come out if not remove the bottom ball joint .not sure where the ...

...SUPPORT IT ASIDE USING A PIECE OF WIRE.REMOVE BRAKE ROTOR.THEN REMOVE THE 3 HUB BEARING ASSEMBLY BOLTS. USE A SWIVEL SOCKET GOING TO BE HARD TO REACH SPOT WITH A REGULAR SOCKET. REMOVE THE HALF ...

... Then Look for 18mm Bolt that Holds Caliper On This is The Caliper AnkorRemove the bolts and there may Be Philips Head Screws Holding Rotor On if So Remove them then Remove Rotor. I Hope This Helps ...

...shock absorbers. at the top of the caliper is the e-brake caliper - there are 2 tabs holding the bolts. bend the tabs back - remove the bolts, springs, and e brake caliper. remove brake line going ...

...holds the brake pads) (17mm) 3. remove the 2 phillips head bolt holding the rotor on 4 remove rotor, if rusted may need to tap it off 5 reverse procedure, when reinstalling caliper, may need to press ...