2005 Pontiac Sunfire "window switch" Questions

Window SWITCH in the CENTER Console they Often Get Liquids SPILLED on them Causing them to Fail, I Would First Check for 12volts @ the Switch with KEY ON. With a Sure 12volts Going IN the Switch Check

...switch to back window. if not switch is bad. try this if need be to find out if wire is broke. run a wire to back window from output on switch, touch or put it on defroster lug at back window. if it ...

window switch from console in 99 Pontiac Sunfire GT convertible? Do you have a convertible ? For convertibles only, refer to Console Replacement. If you don't have a convertible just Use a flat-bladed

...the way up after several attempts. Would this just be with window motor? most likely ur window switch and the problem is that alot cars if the drivers switch fails then the passenger switch wont ...

...window switch panel on the door in many cases one side of the switch works and the other dose not do to it being worn out ! replacing the switch panel is easy and takes less than 5 minutes in most ...

...switch for my automatic window. We thought the regulator was out in my automatic window for my 2000 Sunfire, but once replaced the window would only go down not up. We are thinking that the relay ...

switch the window will advance a few inches then stop. I have to repeat the process several times to get the window closed. I had the same problem. It was a bent rod on the regulator, which burned out

...send the window to the top and hold the switch in the up position for a few seconds. this may re-set the auto up/down function on the window regulator. if this helps please let me know cheers big ...

window switch, the switch is good. I don't know if you have a master control on the driver's door where you can raise/lower all four windows from there, but if you do and neither switch will raise the

...switch as the switches can fail to make a decent contact and carry the current of the window motor.. you will have to check each wire in turn to locate the broken one or disassemble the switch to ...