...brake light and reverse bulbs on driver side only.... if not check for lose groundline on wire of reverse light... if you have a lose ground on reverse line, the reverse light only lits up when ...
side by brake booster. does that have a third brake light ( one on back of cab) if that one don't work then it more than likely brake light switch (on brake pedal) or fuse. if that one works but other
...side Taillight/brake light Bulbs and also Brake switch Located down under dash so brake lights should come on when stepping on brake pedal. Also have checked brake lights Fuse and its good. Tail ...
brake lights wont work. changed fuse in panel. changed brake light switch under pedal.also changed fuse box in trunk area. still no brakes. switch under driver side dash faulty on brake pettal
...side-brake light does't work,i change light bulb,but still doesn't work,panel in side light .ant-lock brake.can you help me.pontiac montana2003. could be a corroded socket or a broken wire on the ...
...just the drivers side. passengers side works fine. replaced bulbs but wont work check or put a ground wire on the light. maybe its bad. run from brake light to a suitable ground, to see if it
Question about Chrysler PT Cruiser
...drivers side pops up but i cannot open the door from the inside Is there anyone who can help me The headlight, brake and turn signal all run out of the turn signal switch. this is what causing you to ...
...drivers side of vehicle up the rear side of back seat. Look at where the wire goes through the cut out in sheet metal. I had the same issue, brake light out, replaced fuse and drove, bralk lights out ...
Question about Chrysler PT Cruiser
...side brake light is not working. Replaced bulb and it worked for a short time. Now not working. Replaced again and its still not working. Alot of times the socket gets deformed from heat and doesnt ...
...brake light works fine no problem there. replaced bulbs, one of them was burnt and looked black (rear driver side) now all lights work. checked fuses and all are in working condition. when i turn on ...
1,571 questions posted
Usually answered in minutes!
1,198 Questions
1,147 Questions
816 Questions
677 Questions
582 Questions