...remove , push tail light gently back and forth to release from clips pull light assembly out , twist bulb socket to remove from housing, replace bulb. once you have the housing off, the bulbs twist ...
Push the bulb down (into the module) and turn it counterclockwise to remove it from the module. 6 Insert the new bulb into the bulb module. Carefully push the bulb down and turn it clockwise. Reinsert
...back of the tail light. 4. Remove the socket and bulb from the back of the tail light by turning and pulling. 5. Remove the tail light mounting screws or nuts. 6. Push the tail light out from
...remove it. Push firmly on the back of the tail light and it will pop out. (note there are 2 spring loaded wedges so it will go slowly) Push out evenly and disconnect the plug. With it out, there is a ...
Remove 2 tail/turn signal lamp assembly retaining screws. Rotate tail/turn signal lamp assembly and remove from vehicle. Disconnect lamp assembly electrical connector. Remove bulbs by pulling straight
...remove the two screws on the inside of the tailgate wall which hold the tail light assembly. Then pull the whole tail light away from the truck. There will be a couple of plastic pins holding it on. ...
tail light assembly. Once you have removed the connector replace the bulb. Some light bulbs just pull straight out of the connector, others you may have to push in and turn counter clockwise to remove
...remove two plastic mushroom nuts, three push pins and the plastic cover from inside the trunk to access the lamp assembly. 2. Carefully pull the carpet away to expose the lamp assembly hardware. 3. ...
785 questions posted
Usually answered in minutes!
832 Questions
814 Questions
819 Questions
720 Questions
623 Questions