...idle, but also when driving, then MAP sensor and EGR system must be checked. Check also accelerator cable state and setting. The first thing to do is pulling out the OBDII fault codes stored in the ...
Question about Cars & Trucks
...going much faster (speed above 40 mph measured with GPS phone app) The speedometer and speedometer cable have been replaced with new parts. I'm thinking that the drive gear on the output shaft is ...
Question about Isuzu Rodeo
...cable not JAMMED (rusted and locked out) https://purperformance.com/p-29669-rpm-calculator.html so 4th OD is, what .75 x 3000 is 2250 RPM (my guess never seen) TCC locked up ,is less RPM, a bit. so ...
...hinge spring C/K Series On trucks with power components in the door, disconnect the battery ground cable. On trucks with power components in the door, remove the cowl side vent cover. On trucks with ...
...use soldering iron, pencil snapped, not a wiring gun. Gun gets too hot unless your building battery cables. Walmart got one for something like eleven bucks. And use double walled heatshring for ...
...two is being a 1990 truck I'd check to see for sure if it did not still have the old mechanical cable from the transmission through the firewall and plugged into the back of the speedometer. If
...you are a hobby or trained welder you can fix the regulator provided the only problem is a broken cable. Remove the entire mechanism from the door and lay it out on a flat clean surface.I bought
1,180 questions posted
Usually answered in minutes!
832 Questions
819 Questions
720 Questions
623 Questions
547 Questions